Relying on our wide experience and skilled workforce, we are considered to be the most reputed manufacturers and exporters of Bitumen Emulsion Machine. These machines find application in various constructional activities like road building, asphalt road surfacing and waterproofing applications. We make sure that these machines are manufactured as per requisite industrial norms and standards. Our offered assortment is widely appreciated for its robust construction, long service life and impeccable performance. We offer heavy duty Bitumen Emulsion Machine at market leading prices.
Large volumes of water bitumen emulsion are used in various constructional activities like road building, asphalt road surfacing and waterproofing applications and which result in cost savings and superior results.
The bitumen in molten form is mixed with water and emulsifier chemicals by means of a high shear, high speed in-line mixer to form a stable emulsion at room temperature. Bitumen and water are mixed in different rates depending upon application. Typically they are in the proportion 50:50 or 60:40. for diffrent grades as RS, MS, SS.
A complete plant normally comprises three stages viz:
1.) Raw material( Bitumen, water, emulsifiers) storage, handling and transfer.
2.) Mixing, emulsifying and handling.
3.) Product storage
This unit comprises the second phase namely mixing, dissolving and transfers
This plant is a unitized arrangement with all elements and subassemblies mounted on a skid type base frame of a size that is conveniently transportable to site.
It consists of the following:
Continuous batch type plant for the production of anionic as well as cationic emulsion of all grades. This is a semi batch type plant that gives output of up to thirty ton per hour. Plus, two tanks of 10 kl capacity are also installed alongside. Both these tanks are supplied feed from the acid tank, water tank, emulsifier tank, etc. Equipped with low & high level sensors, both these tanks are capable of being filled in around thirty minutes or less. Water is moved through a high capacity centrifugal pump. While on the other hand the chemicals & additives are dosed through dosing/metering pumps in the required quantity/proportion. The filled batch is now set to feed into the mixer/in-line homogenizer.
The tank T2 comes on line when the emptying process of tank T1 is complete. At this point, tank T1 is cut off. Simultaneously, it starts again to get filled in for the upcoming cycle. The dispersion/ homogenizer unit is our specially designed mixer. This high shear mixer in SS-304/316 construction has four stages and produces homogenized emulsion single pass. The water mix & molten bitumen are fed into the mixer through high quality VFD motor driven gear pumps. With the help of PLC controller, the mix ratio can also be adjusted as per the requirement. Moreover, each feed pump is equipped with in-line flow meter along with flow transmitter. Therefore, on line control of the needed proportions of the two components can be easily maintained.